Chemical Composition: Modified polyethylene wax

Typical Materialized Data

The data presented on this data page are only typical values , not technical indicators of the product.

Melting point:	115±5℃
Particle size distribution:	D50:6μm     D90:11μm
Supply form:	micro powder material

Storage and Transportation:Store in a cool,dry,and ventilated place.

Used for water,solvent type,solventfree,UVand other coatings ink and powder coating,improve the surface

sliding and wear resistance and scraping resistance.

Application Area

Liquid Coatings and Oil Inks
Product Features and Advantages:This additive can increasethe surface smoothnessin the water-based and solvent- based coatingink,improve the scratch resistance,improve the coating adhesion resistance,and have little impacton the luster and transparency of the coating.
Recommended Use:Aqueous light oil,waterand solvent type printingink,UVcoating

Suggested Dosage:The dosage of0.3-3%additives is based on the totalformula,due to different formulation and process conditions,itis recommended to determine the optimal addition amountthrough experiment before use.
Add Method and Processing Guidance:The product can be dispersed in the paintandink by high-sped mixingor grinding, and can also be prepared into waxand added after preparation.

Powder Coating
Features and Advantages:This additive can improve the surface smoothness and scratch resistance,and improve the surface protection of powder coating.
Suggested Dosage:The 0.3-2%additives are based on the total formulation,and due to the different formulation and process conditions,it is recommended to determine the optimal addition amount through experiments before use.
Add Method and Processing Guidance:Itis recommended to add the base material when pre-mixed,and then squeeze all the material.It can also be added to the material mix with grinding sieve,oradded to the finished powder mixed sieve.