Chemical Composition  Teflon modified polyethylene wax

Typical Materialized Data

The data presented on this data page are only typical values, not technical indicators of the product.

Melting point:	120/320℃
Particle size distribution:	D50:6.5μm D90:11μm
Supply form:	micro powder material

Storage and Transportation Storein acool,dry,and ventilated place.

Used for UV,solvent-based coating inks and powder coatings to improve surface smoothness and wear resistance.

Application Area

Liquid Coatings and Oil Inks
Product Features and Advantages:This additive can reduce the friction coefficientin solvent based coatinginks,has excellent smoothness,and significantly improves the wearresistance and scratch resistance of the coating.
Recommended Use:Floor coating,printingink,wood coating,industrialcoating,UV coating

Suggested Dosage:The dosage of0.3-3%additivesis based on the total formula,dueto different formulation and process conditions,itis recommended to determine the optimal addition amount through experiment before use.
Add Method and Processing Guidance:The product can be dispersed in the paintandinkby high-speed mixing or grinding, and can also be prepared into wax and added after preparation.

Powder Coating
Features and Advantages:This additive can improvethe surface smoothness and scratch resistance,and improvethe stain resistance of powder coating.
Suggested Dosage:The0.2-0.5%additives are based on the total formulation,and due to the different formulation and process conditions,it is recommended to determine the optimal addition amount through experiments before use.
Add Method and Processing Guidance:It is recommended to add the base material when pre-mixed,and then squeeze all the material.It can also be added tothe material mixwith grinding sieve,oradded to the finished powder mixed sieve.